Purchase Corbin HDFLH-DT4-CVO Dual Tour Seat, No Heat for Harley CVO Electra Glide '04-'05

SKU: CBN-HDFLH-DT4-CVO
MPN: HDFLH-DT4-CVO
Corbin HDFLH-DT4-CVO Dual Tour Seat, No Heat for Harley CVO Electra Glide '04-'05

Name: Corbin HDFLH-DT4-CVO Dual Tour Seat, No Heat for Harley CVO Electra Glide '04-'05
Brand: Corbin Seats
SKU: CBN-HDFLH-DT4-CVO
Price: 773 USD
Availability: InStock

$773.00

Custom Made for you. Ships in 2-4 weeks

Seating Panels:

Side Panels:

Stud Bands:

Studs:

Welts:

Stitch Color:

Logo Color:

Special Notes:

Qty

Corbin's HDFLH-DT4-CVO Dual Tour Seat, No Heat is made specifically for Harley-Davidson CVO Electra Glide FLHTCSE (2004-2005).

Features:

Rider Seating: 15" wide x 16" long
Passenger: 12.5" wide x 12" long
Corbin Dual Touring seat for Harley-Davidson CVO Electra-Glide.
The Corbin Dual Touring Saddle installs on your bike like stock using a tongue in the front and a single screw into your fender at the rear. Chrome V-Rail bolts directly to the saddle and doesn't require any outside brackets for installation... very clean!

a person is holding Dual Tour seat showing rear side MPN printed, heater wiring harness and mounting brackets pre-installed

Seat heater assembly comes preinstalled on the saddle and ready to go. We supply the wiring pigtail and adapter to connect the seat directly into your stock Harley fusebox. This is a simple procedure that can be handled by any home mechanic.

a person is connecting seat heater wiring to the stock Harley fusebox

The Dual Tour saddle will NOT work with the low-profile removable sissy bar, which comes stock on the bike, and Corbin's RK-PAD. However the RK-PAD when mounted to a standard Harley-Davidson sissy bar will work just fine.
Corbin seats (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

An exercise in versatility and customizing options for your Screaming Eagle bagger. This newly designed Dual Touring Saddle provides you and a passenger with sculpted seating and long range comfort. Generously contoured seating platforms provide better weight distribution to eliminate pressure points and give long range support that fits your body. A range of setup options are available for the wide variety of accessories that can be used on this bike model. This is the perfect saddle setup for touring quality comfort on your FLHTCSE. Corbin's Dual Touring saddle is available for standard FLH and FLT models as well, but this one is designed specifically for the CVO Screaming Eagle model Electra-Glide. Harley-Davidson refers to this model as the FLHTCSE. The largest difference between our standard Dual Tour seat model and this one is that the nose area of the saddle has been redesigned to match up perfectly to fit to the chrome tank panel that comes on the Screaming Eagle model.

Corbin's Dual Touring Saddle also accepts our chrome "V-rail" for an added nostalgic touch, (but not if you are using a Tourpak or Luggage rack). Show quality chrome plating provides a nice touch of class. Our V-rail mounts directly to the Corbin saddle for simple installation that does not require drilling or brackets.

Both the rider and passenger areas accept a removable backrest. Each backrest is fully adjustable for a tailored fit to rider posture. Use a single backrest and transfer it front to rear as needed or you can order two backrests for full time use in your saddle. Corbin backrests lock in with a single screw and can be adjusted without removing them from the seat. In the front we have engineered the backrest to fold down to make it easier to mount the bike. Corbin's backrest hardware is spring loaded to make the rest pop back upright after you throw your leg over. This special hardware (internal to the saddle) also allows the backrest position fore and aft to be adjusted to your profile. This enables the backrest to be completely customized to fit your riding posture.

For even more versatility, this saddle was also designed to work in conjunction with one of the Tourpaks available from Harley-Davidson. We offer two different trunk pads for this setup depending on how much back support you want for your passenger. The touring pad with arms gives your copilot maximum support and comfort. This works especially well on the larger Tourpak. Our thin trunkpad provides a very clean, low profile look and still gives reasonable support. If you're using the low profile Tourpak (commonly called the Pizza box) this is a great solution!

If you're leaning towards a luggage rack rather than the Tourpak, we also happen to make a coordinated pad to fit. Naturally if you use a setup like this, the Chrome V-Rail cannot be installed on the saddle at the same time. If you're luggage rack is a "detachable" model, you can always transfer your rider's backrest into the passenger position when the rack is removed from the bike. This allows you to change the look of your bike quickly and easily. Corbin's luggage rack pad is ergonomically sculpted, just like our backrests to provide excellent support without hot spots. Mounts on your luggage rack like the stock pad.

For the ultimate in luxury, we have built electric seat heaters into our Dual Touring saddle design. A single switch controls the heat for both the rider and passenger positions. The switch is conveniently located along the left side of the saddle so you can reach it without taking your hand off the throttle. The two position switch allows you to select a heat level depending on conditions. The level of heat is controlled automatically by a thermostat built into the control unit. Controller and thermostat come preinstalled on the saddle so installation is a snap.

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.