Call or WhatsApp 786-242-5400 | Mon-Fri 9-5 EST

Product Search

    Secure Checkout
    Corbin HD-FLH-9-S2 Classic Solo Seat(no Heat) for Harley Touring (2009-)
      Corbin HD-FLH-9-S2 Classic Solo Seat(no Heat) for Harley Touring (2009-)
      Purchase Corbin HD-FLH-9-S2 Classic Solo Seat(no Heat) for Harley Touring (2009-)

      SKU: CBN-HD-FLH-9-S2
      MPN: HD-FLH-9-S2
      Corbin HD-FLH-9-S2 Classic Solo Seat(no Heat) for Harley Touring (2009-)


      Custom Made for you. Ships in 3-4 weeks
      Corbin's HD-FLH-9-S2 Classic Solo Seat(no Heat) is made specifically for Harley-Davidson Touring (2009-current).


      • Measurements: Rider seating: 15.5" wide x 16" long
      • Classic Solo with Pillion and Trunk options.
      • Solo accepts optional, removable rider backrest for added long range support.
      • Provides a clean, low profile with a ergonomically supportive ride.
      • Works with the Harley-Davidson detachable sissybar pad. Multiple sissybar pad options available.
      • The most versatile seat system available for your Bagger.
      • Includes genuine leather seating and a wide range of color & material options at no extra charge.
      • Use one of our machined stainless steel thumbscrews for tool-free installation and removal.
      • Backrest hardware is concealed behind a sliding 'door' for a clean look when not installed.
      • Shaped narrow in the nose to provide good ground reach at stop signs.
      • Ergonomically sculpted seating helps to eliminate hot spots and centralized pressure.
      • Component system provides a wide variety of configuration options.
      • Close Solo shown with Touring pillion and #HD-FLH-9-ARM sissybar pad.
      • Corbin solos work with the Tourpak in the front mount position.
      • Sissybar pads countersink the bar to provide additional seating room.
      • Corbin Classic Solo saddle is available with optional electric heat.
      • Classic and Close solos are designed to mount using Corbin's integrated key lock system. Once brackets are installed, saddles will mount & remove with a simple key in the side.We have found that most riders prefer a lower, more relaxed riding posture on their baggers. As such many riders have rotated the stock handlebars back two inches. This setup works very well with our Classic Solo saddle.
      • Note: This Classic Solo does not accept the Corbin Chrome V-Rail nor will it work with the HD passenger grab rail.
      • Corbin saddles will not work with engine heat shields that mount on top of the frame and under the nose of the seat.
      • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
      Classic styling with a nostalgic touch and generously sculpted seating... that's Corbin's Classic Solo saddle! Designed specially to fit the 2009 and up Electra-Glide, Road Glide and Street Glide models.

      The lower chassis of 2009 and up Baggers gave us additional design latitude for developing a perfected shape and good ground reach. Wide, sculpted seating position creates a larger area of contact for excellent weight distribution. Shaped like your body to eliminate pressure points and give long lasting support that will keep you in the saddle all day. Also available in a Close version that provides seating two inches closer to the bars with a narrower nose to ease ground reach.

      Corbin's rigid fibertech basepan provides a perfect fit and is built low to hug the frame. This allowed us to create a foam shape that keeps you in the sweet spot which provides a better center of gravity and more positive feeling of control. Deep, supportive bucket design gives over four inches of vertical support (14" with backrest installed). All of this adds up to a very relaxed posture and comfortable ride so you'll be able to go out and put serious miles under the tires.

      Inside, our exclusive Comfort Cell foam provides firm support that stays resilient indefinitely. We cast this special Closed Cell material nearly twice as firm as the stock foam to support your body weight for day long comfort. That's why we always say "firm is a good thing!"

      Designed to work with an optional Corbin backrest for added comfort and support. Angle adjustable to fit a wide variety of statures and riding postures. Internal hardware keeps a clean look on your bike. Works with a variety of Corbin backrest models. We recommend model #02-SB Ovalbac or #BR Edge for a very good blend of form and function.

      Classic and Close Solo saddles work with either of two passenger pillion seat models to suit your taste and riding needs. Touring pillion is shaped for a large contact patch and maximum passenger comfort. 50's style pillion provides a slimmer profile for clean looks with medium range passenger support. Both models will work with all three Tour-Pak models or with the HD detachable sissy bar system. Both are constructed of the same high quality materials as the Classic Solo and are covered to match for an integrated look.

      When using a sissy bar or Tour Pak, we offer coordinated backrest pads to match your Corbin system. In the images above we show our Trunk Armrest (#HD-PAK-ARM or #HD-PAK-ARM-14) on the King Tour Pak, our Ovalbac Trunkrest (#HD-503 or #HD-PAK-14-T-PAD) on the Chopped Tour Pak and our Slim Trunkpad (#502-2 or #HD-PAK-14-S-PAD) on the Razor Pak. For the detachable sissy bar, we offer contoured touring quality backrest pads that coordinate with your driver's backrest or a new Armrest version for maximium passenger support. All components are covered to match your Corbin saddle system.

      All components include genuine leather seating inserts for a truly luxurious ride. For a very classy and subtle touch we recommend our standard natural grain leather seating with coordinating vinyl sides. We prefer leather seating because it is durable, will breathe with your body and adapt with the foam shape as it breaks in. Vinyl side panels help to support the foam shape and keep the cover looking nice longer. A wide variety of color and texture options are available by special order at no additional charge.

      Please note: The cover pattern on the CLOSE Solo saddle has a seam in the main seating panel as shown in this image. The standard Classic Solo saddle does not have this seam.

      Classic Solo saddle offers the option of an electric seat heater for an added bit of luxury. Wiring easily into your stock HD fusebox, the Corbin seat heater is controlled via a conveniently located switch along the left side. Two heat settings are available and are maintained automatically by integrated controller. You just wire in the Corbin supplied pigtail and enjoy the warmth on those chilly morning rides.

      Corbin's solo saddles use our key lock system for easy on and off. Once the included brackets are mounted the saddles will install and remove with a simple twist of a key. Corbin brackets mount to stock locations on your bagger and are very simple to install. Our passenger pillion seat install with a tongue under the Corbin Solo saddle and a single bolt into the fender at the rear. For a clean, tool-free installation use one of our billet thumbscrews here! If you opt for electric heat, we include a wiring pigtail that integrates with the oem fuse box. Complete instructions included.

      Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-SB backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.

      New Backrest Hardware CoverThis saddle cover has been updated to use our new backrest hardware cover with the sliding door as shown here. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!

      Fits Harley-Davidson:

      Electra Glide & Ultra models without Tour Pak (2014-current)
      Electra Glide, Ultra, Ultra Classic, Ultra CVO (2009-2013)
      FLHX Street Glide (2009-2022)
      Road Glide (2009-2022)

      It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

      Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

      Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

      Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.


      UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

      FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

      COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

      ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

      PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

      GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.

      CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired.

      ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll.

      KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key.


      Installation Instructions

      Related Products

      Best Sellers

      Connect with our Team

      Call or WhatsApp: 786-242-5400 📞

      Call or WhatsApp 786-242-5400