Call or WhatsApp 786-242-5400 | Mon-Fri 9-5 EST

Product Search

    Secure Checkout
    Corbin HD-FLH-9-DT-2 Dual Tour Seat(no Heat) for Harley Touring (2009-)
      Corbin HD-FLH-9-DT-2 Dual Tour Seat(no Heat) for Harley Touring (2009-)
      Purchase Corbin HD-FLH-9-DT-2 Dual Tour Seat(no Heat) for Harley Touring (2009-)

      SKU: CBN-HD-FLH-9-DT-2
      MPN: HD-FLH-9-DT-2
      Corbin HD-FLH-9-DT-2 Dual Tour Seat(no Heat) for Harley Touring (2009-)


      Custom Made for you. Ships in 3-4 weeks
      Corbin's HD-FLH-9-DT-2 Dual Tour Seat(no Heat) is made specifically for Harley-Davidson Touring (2009-current).


      • Measurements: Rider seating: 15.5" wide x 16" long
      • Passenger: 14" wide x 12" long
      • Dual Touring Saddle shown on HD Street Glide.
      • A variety of color and material options are included at no extra charge.
      • Corbin Dual Tour provides maximized seating platforms for two riders.
      • Dual Tour works with a variety of Corbin and Harley-Davidson accessories and racks.
      • Ergonomically sculpted seating platforms disperses weight and eliminates hot spots.
      • Works with a removable Corbin backrest in front and rear if desired.
      • We offer a variety of passenger pads for the HD Tour Pak.
      • Maximized seating platforms give more square inches of body contact for better support.
      • Dished to fit the shape of your body and eliminate hot spots.
      • Dual Tour is built narrow in the nose to allow for good ground reach and fits close to the tank and center panel.
      • Corbin trunk armrest works with Tour Pak mounted luggage racks.
      • Dual Tour saddle installs with a single bolt in the fender at the rear. Use one of these chromed billet thumbscrews for tool free installation.
      • Mounts easily with a tongue in the front and a single screw into stock location in rear fender. For tool free installation use our optional Chromed Billet thumbscrew #ACST-20.
      • Dual Tour saddle does not fit with passenger hand rails or OEM rider backrest.
      • We have found that most riders prefer a lower, more relaxed riding posture on their baggers. As such many riders have rotated the stock handlebars back two inches. This setup works very well with the Corbin Dual Tour.
      • This seatdoes not work with the SHORT sissy bar available from HD #52610-09 and #54248-09.
      • Corbin seats will not work with engine heat shields that mount on top of the frame and under the nose of the seat.
      • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
      The most generously sculpted seating this side of your living room sofa! Designed specially to fit the 2009 and up Electra-Glide, Road Glide and Street Glide models. We also have a version of this saddle with Heated AND Cooled seating.

      The lower chassis used for Harley's 2009 and up Baggers freed us up for a new level of ergonomically designed perfection. Wide, sculpted seating positions create a larger area of contact for excellent weight distribution. Shaped like your body to eliminate pressure points and give long lasting support that will keep you in the saddle all day.

      Corbin's rigid fibertech basepan provides a perfect fit and is built low to hug the frame. This allowed us to create a foam shape that keeps you in the sweet spot which provides a better center of gravity and more positive feeling of control. Deep, supportive bucket design gives over five inches of vertical support (15" with backrest installed). All of this adds up to a very relaxed posture and comfortable ride so you'll be able to go out and put serious miles under the tires.

      Inside, our exclusive Comfort Cell foam provides firm support that stays resilient indefinitely. We cast this special Closed Cell material nearly twice as firm as the stock foam to support your body weight. Soft foam allows your body to fall through it the longer you sit on it... once compressed, soft foam offers no resilience and you start to experience discomfort. That's why we always say "firm is a good thing!"

      Rider's seating area is designed to work with an optional Corbin backrest for added comfort and support. Fully adjustable to fit a wide variety of statures and riding postures. Internal hardware keeps a clean look and allows for adjustment of the backrest fore - aft as well as the standard angle adjustment. Spring loaded fold down feature makes it easier to mount the bike. Works with a variety of Corbin backrest models. We recommend model #02-SB (shown) for a very good blend of form and function.

      Passenger seating area works with virtually any configuration on the HD baggers. Use it with your Electra-Glide's King Tour-Pak, Chopped Tour-Pak, Razor-Pak, with the HD detachable sissy bar system or with another Corbin removable backrest in the rear. Naturally the Corbin backrest offers an angle adjustment for tailored fit to your passenger's profile. Simple installation allows you to use a single backrest transferred front to rear as needed or order two backrests for full time use.

      When using a sissy bar or Tour Pak, we offer coordinated backrest pads to match your Corbin system. On the Tour Pak above we show our trunk armrest that provides maximum passenger support, our redesigned slim trunkrest (#502-2) and an Ovalbac Trunkrest option (#HD-503). Our Trunk Armrest offers a sculpted design that gives a large contact patch and excellent support with integrated armrests that works great on the HD King Tour Pak. Slim trunkrest has excellent, contoured support with a slick look that works great on all three models of Tour Pak. Corbin's Ovalbac trunkrest gives more support than the slim model but provides a cleaner profile without arms. For the detachable sissy bar, we offer a contoured touring quality backrest pad that bolts up just like the stock pad or a new Armrest version for maximium passenger support. All components are covered to match your Corbin saddle system.

      All components include genuine leather seating inserts for a truly luxurious ride. For a very classy and subtle touch we recommend our standard natural grain leather seating with coordinating vinyl sides. We prefer leather seating because it is durable, will breathe with your body and adapt with the foam shape as it breaks in. Vinyl side panels help to support the foam shape and keep the cover looking nice longer. A wide variety of color and texture options are available by special order at no additional charge. Includes tasteful flame stitch pattern with Winged Wheel design in back panel, Tuck & Roll stitch or Double Diamond stitching.

      Dual Touring saddle offers the option of electric seat heaters for an added bit of luxury. Wiring easily into your stock HD fusebox, the Corbin seat heaters are controlled via a conveniently located switch along each seating position on the left side. Heat level is maintained automatically by integrated controller. You just wire in the Corbin supplied pigtail and enjoy the warmth on those chilly morning rides.

      Simple installation uses a tongue in the front and a single bolt into your fender at the rear. For tool free installation and a very clean look we offer a chromed billet thumbscrew for this location. If you opt for electric heat, we include a wiring pigtail that integrates with the oem fuse box.

      Here's something new... Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-B backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.

      Fits Harley-Davidson:

      Electra Glide & Ultra models without Tour Pak (2014-current)
      Electra Glide, Ultra, Ultra Classic, Ultra CVO 2009-2013
      FLHX Street Glide (2009-current)
      Road Glide (2009-current)

      It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

      Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

      Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

      Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.


      UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

      FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

      COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

      ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

      PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

      GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.

      CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired.

      ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll.


      Installation Instructions

      Related Products

      Best Sellers

      Connect with our Team

      Call or WhatsApp: 786-242-5400 📞

      Call or WhatsApp 786-242-5400