Name: Corbin HD-FLH-6-DT-CE Dual Tour CLOSE Seat, with Heat for Electra Glide / Road Glide '06-'07
Brand: Corbin Seats
SKU: CBN-HD-FLH-6-DT-CE
Price: 998 USD
Availability: InStock

Corbin HD-FLH-6-DT-CE Dual Touring CLOSE Seat, with Heat is made specifically for Harley-Davidson Electra Glide / Road Glide (2006-2007).

Features:

Measurements: Rider Seating: 15" wide x 16" long
Passenger: 12.5" wide x 12" long
Corbin Dual Touring saddle for HD Electra Glide and Road Glide.
Two mounting brackets are included to allow use of the Corbin Key lock system. A stainless steel pin goes into the stock fender screw location. A bracket then mounts into the chassis at the fromt to provide a latch pin for the lock. The seat will now slide into place rear first and lock down onto the pin at the front.

a person holding Dual Touring seat showing rear side with MPN printed, heater wiring, keylock system and mounting brackets pre-installed

Seat heater assembly comes preinstalled on the saddle and ready to go. We supply the wiring pigtail and adapter to connect the seat directly into your stock Harley fusebox. This is a simple procedure that can be handled by any home mechanic.
This seat model does not work with the fender mounted passenger grab rail to make a cleaner appearance. If you will be using that component, we make another Dual Touring seat model specifically for that application.
Available in either Standard or CLOSE versions. Our Close saddle offers seating 1.5 inches closer to the bars for an easier reach. The close model also has a narrower nose to ease your reach to the pavement.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

An exercise in versatility and customizing options for your bagger, this Dual Touring Saddle provides you and a passenger with sculpted seating and long range comfort plus the luxurious option of electric seating heaters. Generously contoured seating platforms provide better weight distribution to eliminate pressure points and give long range support that fits your body. Ranges of setup options are available for the wide variety of accessories that can be used on this bike model. This model is not designed to work with the fender mounted passenger grab rail, but we have one in the works now that will. Now available in a standard and CLOSE version for riders who want an easier reach to the bars and pavement.

Accessory Info: Designed to work with two Corbin removable rider backrests or in conjunction with one of the Tour Paks or Sissy Bar systems available from Harley-Davidson. Our cool Streamliner trunk works in place of the HD Tour Paks for a smoother, more aerodynamic look. In the animation above, we show two different "detachable" sissy bar backrests from Harley and the Detachable Trunk setup. Here are the details:

Detachable Short Sissy Bar #52935-04. This model works with our Dual Tour seat along with the HD pad.

Detachable Tall Sissy Bar #52933-97A. This model works with the Harley-Davidson pad or with a coordinated Corbin backrest pad #RK-PAD.

In addition to the accessories mentioned above, both the rider and passenger areas accept a removable backrest. Each backrest is fully adjustable for a tailored fit to rider posture. Use a single backrest and transfer it from front to rear as needed or you can order two backrests for full time use in your saddle. Corbin backrests lock in with a single screw and can be adjusted without removing them from the seat. In the front we have engineered the backrest to fold down to make it easier to mount the bike. Corbin's backrest hardware is spring loaded to make the rest pop back upright after you throw your leg over. This special hardware (internal to the saddle) also allows the backrest position fore and aft to be adjusted to your profile. This enables the backrest to be completely customized to fit your riding posture.

If you opt for the Ovalbac model backrests as shown, you have the additional customizing option of the removable finishing plates on the rear. Our standard plate is a black ABS Leather pattern as shown. Additionally we can supply either a Carbon-Fiber look or primer (for custom painting) at no added charge. For just a little extra, get your Ovalbac plate prepainted gloss black or a beautifully chromed steel model.

For the ultimate in luxury, we have built electric seat heaters into our Dual Touring saddle design. A single switch controls the heat for both the rider and passenger positions. The switch is conveniently located along the left side of the saddle so you can reach it without taking your hand off the throttle. The two-position switch allows you to select a heat level depending on conditions. The level of heat is controlled automatically by a thermostat built into the control unit. Controller and thermostat come preinstalled on the saddle so installation is a snap.

Of course, we use genuine leather in all of our seat models to provide a luxurious ride that breathes with your body. Leather will break in along with your foam shape to give you a personalized fit and will age gracefully with proper care. Take good care of your leather seat with a quality conditioner like Corbin's Saddle Cream. Your seat will look nice for years and show character just like your leather jacket.

Installation is a snap with our new key-lock system. You simply install two included mounting brackets into stock locations on your Harley bagger and the seat will slip into position and lock in place. Removal and reinstallation is simple using the included key. If you currently have reach issues on your Bagger, you will probably want to use our Close version. This model is designed 1.5 inches closer to the bars with a narrower nose for easier ground reach.

LEATHER COLORS

VINYL COLORS

Samples available on request. Don't hesitate to contact us.

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.