My Cart: 0 item(s)
Corbin's HD-23CVO-WT-B Tall Wall Seat, No Heat is made specifically for Harley-Davidson CVO Road Glide & Street Glide (2023-current).
Features:
- Measurements: Tall Rider seatting: 12.5" wide x 17" long x 5" deep
- Back suport with #BR: 13.5"
- Corbin Wall saddle for Street Glide CVO and Road Glide CVO.
- Excellent rider comfort and support with a clean fastback look.
- Accepts rider backrest for added lower back support.
- More square inches of body contact equates to better weight distribution.
- Tall Wall saddle offers extended reach and added seat height.
- Built up with Corbin's exclusive Comfort Cell foam for firm support that lasts.
- Corbin backrests install easily and adjust to rider posture.
- Backrest model #BR adds 8.5 inches of vertical support. Total height Standard seat 15 inches, Tall seat 13.5 inches.
- Fastback tail section is padded and upholstered to provide for short trip passengers.
- Wall saddle fits perfect to the chassis and redesigned side covers on the CVO models.
- Clean sporty looks combined with rider comfort.
- Ergonomically shaped to eliminate hot spots and centralized pressure.
- Includes genuine leather and a wide range of material options all included at no extra charge.
- Sculpted close to the side panels at the front to allow for good ground reach.
- Fits perfect to the crown of the fender for clean looks. Installs with a single bolt into your fender.
- Wall saddle offers the option of electric heat for a bit of luxury on those chilly morning rides.
- Neutralized seating platform curbs sliding in the saddle and sits rider in the sweet spot on the bike.
- Backrest installs and removes easily and has finishing plate options for another added custom touch.
- Fastback tail supports short trip passengers.
- Mounting tab is available in Chrome or Gloss Black Powder Coat, please specify when ordering.
- Saddle installs easily with a tongue in the front and a single bolt into your fender at the rear. If you opt for heated seat, we include a pigtail that integrates with the HD wiring harness.
- This is the No Heat version, find the Heated version from here.
- This model is designed specifically for the 2023 CVO Street Glide and CVO Road Glide. If you have a 2023 CVO Road Glide Limited, you need THIS SADDLE instead.
- Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
The Wall saddle is designed with a taller and more vertical back support area to hold the rider in position more aggressively. This is a great setup for high output bikes like the new CVO as the Corbin saddle keeps you planted. Is it possible to get too much of a good thing? Not when it comes to support, so the Wall saddle has the option of a removable rider's backrest too.
Corbin's Wall Saddle is available as a Standard or Tall model for riders of varying stature. Tall saddle offers seating 1.5 inches higher and nearly 2 inches further back from the bars. Both models work with the optional Corbin backrests for a tremendous amount of support. With #BR backrest installed (shown), the Standar model provides 15 inches of vertical support and the Tall model provides 13.5 inches.
As far as passengers are concerned, the tail of the Wall saddle is padded and upholstered to provide for short trips. Although this is built with the same quality foam material as the rider's area, the shaping is designed primarily for looks and rider back support. When taking a passenger make sure you tell them to hold on tight!
Corbin backrest installs easily with just a single bolt under the fender and adjusts to your riding posture. Choose from a variety of styles and sizes to suit your taste and the amount of support desired. Our Ovalbac model #BR is shown above. Corbin backrests also have rear finishing plate options for an added custom touch. Choose from: Black leather texture, Faux Carbon-Fiber, Paintable or even pre-painted to match your bike for a little extra.
Up front, the ergonomically designed platform increases the area of body contact to disperse rider weight evenly and eliminate hot spots. Dished in the center to eliminate pressure on the tail bone. At the nose of the saddle we sculpt it narrow to provide for good ground reach.
As always, our exclusive Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile. High density foam provides a long lasting ride and plenty of support. The entire saddle touches your Harley only with rubber bumpers to protect your paint job. Provides a perfect fit to the new side panel design and contours the crown and profile of the fender.
Includes genuine leather seating panels in your choice of colors and styles for a truly distinctive touch. Leather seating is best because it breathes with your body and will conform with the foam shape for a personalized fit after break in. Leather is also extremely durable for years of enjoyment. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.
Shown above we used the following materials for a coordinated sporty look:
Tall Model: Smoke Bomber Jacket seating, Black leather trim, Charcoal Alcantara sides, Black Brushed Aluminum welt, Trexx Gear tail section and Black Corbin logo.
For an added bit of luxury on those chilly morning rides, the Wall saddle offers the option of electric heated seating. We include a wiring pigtain that interfaces with your stock wiring and all other components are contained inside the saddle. All you need to do is flip the switch and enjoy the warmth.
The Wall saddle installs on your bike using a tongue in the front and a single bolt into your fender at the rear. For a very clean and simple, tool free installation, use one of our machined stainless steel thumbscrews at the rear. Available in a variety of sizes to suit multiple needs. The seat install location on your bike uses a 1/4" x 20 thread, so the appropriate thumbscrew is #ACST-20. Corbin Wall saddle works with HD rear crashbar installed.
It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.
Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.
Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.
Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.
Specifications:
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.
COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired.
Downloads
Installation InstructionsRelated Products
Best Sellers
Connect with our Team
Questions?
Call or WhatsApp: 786-242-5400 📞
