Purchase Corbin H-V14-DT Dual Tour Seat(no Heat) for Honda Gold Wing Valkyrie '14-'15

SKU: CBN-H-V14-DT
MPN: H-V14-DT
Corbin H-V14-DT Dual Tour Seat(no Heat) for Honda Gold Wing Valkyrie '14-'15

Name: Corbin H-V14-DT Dual Tour Seat(no Heat) for Honda Gold Wing Valkyrie '14-'15
Brand: Corbin Seats
SKU: CBN-H-V14-DT
Price: 820 USD
Availability: InStock

$820.00

Custom Made for you. Ships in 2-4 weeks

Seating Panels:

Side Panels:

Welts:

Stud Bands:

Studs:

Stitch Color:

Logo Color:

Special Notes:

Qty

Corbin's H-V14-DT Dual Tour Seat (no Heat) is made specifically for Honda Gold Wing Valkyrie (2014-2015).

Features:

Measurements: Rider seating: 17" wide x 16" long x 5.5" deep
Rear area: 12" wide x 12" long
Approx seat height: 29"
Corbin Dual Touring saddle for Honda Gold Wing Valkyrie.
Works with Two Corbin Backrests or Honda Sissybar.
Maximized seating platforms with a clean, flowing look.
Provides tremendous back support.
Coordinating sissy bar pad available for OEM bar.
If you prefer to run your bike without a sissybar, the Corbin seat accepts a removable backrest in the rear also.
Corbin Backrests adjust to riding posture and install or remove easily as desired.
If you'd like a little convenient storage, we offer this optional Glovebox for the Corbin backrest system.
Corbin Glovebox holds four liters of your essential gear like cell phone, bottled water, GDO remote and spare gloves.
Corbin's high density Comfort Cell foam provides a firm supportive ride with a clean, low profile.
More square inches of body contact means better weight distribution.
Our sissybar pad is contoured to fit the shape of your passengers back without hot spots.
Includes genuine leather seating and a host of color options at no extra charge.
Ergonomically shaped to eliminate centralized pressure and give even weight distribution.
Passenger seating is neutralized to curb sliding and dished for even support.
Ergonomic shaping gives a clean, organic look on the bike.
Optional electric seat heaters provide another level of luxury on those chilly rides.
Installs easily with a tongue in the front and two bolts in the rear into stock locations.
Corbin's Dual Touring saddle installs easily with a tongue in the front and two bolts into your fender at the rear using stock locations. If you opt for electric heat, we include a wiring pigtail to integrate with the factory fusebox and all other components will be preinstalled in the saddle.

a person holding Dual Tour seat showing the back side heater wiring, MPN printed and mounting brackets pre-installed

Corbin's one piece Dual Tour Saddle takes the place of the two piece OEM unit.
Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.

Corbin maximized the seating area and positioned the rider bucket in the sweet spot to offer the best possible ergonomics and long range comfort. Sculpted seating platforms conform to the shape of your body to give more square inches of even support and eliminate hot spots and pressure on your tailbone.

Neutralized seating platform helps to hold your body in place and curbs sliding in the saddle. This also helps to relieve rider fatigue by taking pressure off your wrists and knees. Our exclusive Comfort Cell foam material on the inside provides a firm, resilient ride that supports your body indefinitely. Over time, Comfort Cell will break in and adapt to provide a personalized fit to your body.

Bucket shaping of the front seating area gives an unprecedented amount of body support. Notice how it curves up at the back to provide over five inches of support to your lower back. Towards the front of the bucket we design the saddle narrower to allow for ground reach. Smaller riders may prefer to slide forward and out of the bucket at stop signs for best ground reach.

This Dual Touring saddle accepts an adjustable backrest in both the rider's and passenger's seating areas. Backrests install and remove easily with a single bolt and adjusts to provide a tailored fit to rider posture.

Backrests are available in several styles to suit your taste. We've found the #02-SB Ovalbac to provide the right blend of clean visuals and rider support. This model provides an additional nine inches of vertical support and is sculpted to fit the shape of your back. Covered with genuine leather to match your saddle and built up with Comfort Cell foam for long lasting comfort. At the rear we offer a variety of finishing plate options. Our standard plate is a black leather look, but for a little extra we can provide it prepainted gloss black or with a mock carbon-fiber look. Our Ovalbac model backrest also offers the option of a chromed steel finishing plate.

Corbin's Dual Tour has the option of electric seat heaters in both the rider and passenger seating positions. Both the rider and passenger areas are controlled via a conveniently located switch in the left side panel. We supply a wiring pigtail that integrates with the OEM fusebox for simple installation. Complete instructions included.

Our Fibertech base material and patented manufacturing process allows a perfect fit to the lines of the fender and tank. This rigid baseplate provides the saddle with a firm foundation to support the carefully designed ergonomics of the foam. The entire seat rides on rubber bumpers to protect your paint job and mounts to your bike with a tongue in the front and single screw into your fender at the rear.

On the outside we use genuine leather seating for a luxurious ride that breathes with your body. We've designed a cover pattern that blends with the bike's visuals and allows a variety of customization options. Shown here with our Natural Grain Black Leather seating, Stealth stitch pattern and Asphalt vinyl side panels for contrast.

For your Honda sissybar (if equipped) we offer a coordinated pad that looks perfect with the Corbin Dual Tour setup. Corbin's sissybar pad offers excellent passenger support sculpted to fit the shape of their back to eliminate pressure points. Pad mounts easily to your Honda sissybar just like the original pad and includes genuine leather back panel to coordinate to your Corbin saddle.

Simple installation with a tongue in the front and two bolts into your fender at the rear in stock locations.

This saddle cover has been updated to use our new backrest hardware cover with the sliding door as shown here. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!

It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

Specifications:

UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.

ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll.

CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired.