Call or WhatsApp 786-242-5400 | Mon-Fri 9-5 EST

Product Search

    Secure Checkout
    Corbin D-SCRM-GL Gunfighter & Lady Seat for Ducati Scrambler (2015-)
      Corbin D-SCRM-GL Gunfighter & Lady Seat for Ducati Scrambler (2015-)
      Purchase Corbin D-SCRM-GL Gunfighter & Lady Seat for Ducati Scrambler (2015-)

      SKU: CBN-D-SCRM-GL
      MPN: D-SCRM-GL
      Corbin D-SCRM-GL Gunfighter & Lady Seat for Ducati Scrambler (2015-)

      $649.00

      Custom Made for you. Ships in 2-4 weeks
       
      Corbin's D-SCRM-GL Gunfighter & Lady Seat is made specifically for Ducati Scrambler (2015-current).

      Features:
      • Measurements: Rider seating: 12" wide x 15" long
      • Passenger: 10" wide x 9.5" long
      • Approx seat height: 31"
      • Corbin Gunfighter & Lady saddle for Ducati Scramber.
      • Works with optional removable backrest for added passenger security.
      • Maximized seating positions offer improved comfort value.
      • High density Comfort Cell foam offers firm support and a clean, low profile.
      • Sport touring quality comfort for two riders on the Scrambler.
      • Corbin backrest installs easily with a single bolt and adjusts to passenger's posture.
      • Backrest accepts optional Glovebox to add four liters of convenient, locking storage.
      • Corbin Glovebox is perfect for all your small incidentals like spare gloves, water bottles, GDO remotes and cell phone.
      • More square inches of body contact means better weight distribution.
      • Ergonomic shaping gives a clean, flowing look on the bike.
      • Genuine leather seating and a wide variety of custom color options are included at no charge.
      • Built narrow in the nose to provide for good ground reach at stop signs.
      • Dished seating areas relieve centralized pressure and support your body ergonomically.
      • Fibertech basepan fits perfect to the Ducati chassic, tank and fender.
      • Shown here with Black Bomber Jacket seating, Diamond stitching, Asphalt side panels, Carbonium Bands and Italian Flag Emblem.
      • Gunfighter & Lady saddle mounts similar to stock using a tongue at the front and a latch pin at the rear that integrates with your Ducati key lock. Corbin supplies spacers and a small bracket that needs to be added near the tank for installation (Gunfighter seat pan shown).
      a person holding Gunfighter seat showing the rear side, MPN printed and mounting brackets pre-installed

      • Does Not fit Scrambler Full Throttle or Scrambler Cafe Racer.
      • Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel.
      Two up comfort with a nostalgic look appropriate to the Scrambler models. We've taken a familiar bench style, two up seat and sculpted it with dual rider buckets that offer a more ergonomically correct seating position. This shaping helps to reduce the pressure points that create hot spots while supporting your body with more square inches of contact area. In the nose area, we sculpt the saddle narrower to allow for good ground reach.

      Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shape provides an excellent contact patch while maintaining a clean look. This gives your passenger excellent comfort. For additional comfort and a feeling of added security, the Corbin saddle works with an optional removable passenger backrest. Simple to install with just a single bolt under the saddle and fully adjustable to provide a tailored fit.

      We offer several backrest models to suit your taste and the degree of support desired. For the best combination of looks and support, we recommend the #02-SB model Ovalbac backrest shown on this page. This backrest provides a generous, contoured area of support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.

      Notice how close the Corbin saddle fits to the tank and fender ... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal.

      On top, we include genuine leather seating panels for a luxurious ride. For the seat shown on this page we used Black Bomber Jacket seating, Diamond stitching, Asphalt side panels, and Carbonium bands. For ultra clean looks we do not recommend using a welt on this saddle model though they are available.

      We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.

      Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the #02-SB Ovalbac or #297-SB backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.

      Gunfighter & Lady saddle installs similar to stock and integrates with the Ducati key lock system. Once you install the nose bracket near the tank, the Corbin saddle will slide into place nose first and latch down with the OEM key lock. Latch pin comes preinstalled on the Corbin saddle.

      This saddle cover has been updated to use our new backrest hardware cover with the sliding door as shown here. To install the backrest, just slide the cover over to the side. When the backrest is not needed, just slide it closed. It doesn't get easier than that!

      It all started with a Norton Atlas over 50 years ago Now the Corbin name is synonymous with Quality, Hand Crafted motorcycle saddles worldwide. Hand built with pride in the USA using proprietary, purpose built materials and patented manufacturing processes. Unique, cutting edge designs that provide the perfect blend of form and function.

      Over 1,400 part numbers means they offer more applications across more brands and models than any other motorcycle seat maker. Trends come and go, but quality never goes out of style.

      Corbin offers more than 70 color and texture options for your custom build motorcycle seat at no additional charge. Corbin saddles include genuine leather seating for a truly luxurious ride that will last for years to come. Build your seat any way you like from mild to wild.

      Corbin is proud to support the Championship winning team of Jared Mess and join forces with Memphis Shades to field up and comer Cole Zabala in the 2022 season.

      Specifications:

      UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.

      FIBERTECH BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body.

      COMFORT CELL FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort

      ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride!

      PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material.

      GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.

      CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! 


      Related Products


      Best Sellers


      Connect with our Team
      Questions?

      Call or WhatsApp: 786-242-5400 📞

      Call or WhatsApp 786-242-5400