Call or WhatsApp 786-242-5400 | Mon-Fri 9-5 EST

Product Search

    Secure Checkout
    Kriega KOSBA-H OS-Base Dry Bags Straps for Husqvarna Norden 901 (2021-)
      Kriega KOSBA-H OS-Base Dry Bags Straps for Husqvarna Norden 901 (2021-)
      Purchase Kriega KOSBA-H OS-Base Dry Bags Straps for Husqvarna Norden 901 (2021-)

      SKU: KR-KOSBA-H
      MPN: KOSBA-H
      Kriega KOSBA-H OS-Base Dry Bags Straps for Husqvarna Norden 901 (2021-)

      $199.00

       
      Kriega's KOSBA-H OS-BASE Dry Bags Straps are made specifically for Husqvarna Norden 901 (2021-current).

      Designed to be a perfect fit on the Husqvarna Norden 901 with a custom shape and specific fitting hardware. The OS-BASE 901 is an 'over the seat harness' for mounting OS-6OS-12, or OS-18 ADVENTURE PACKS as soft panniers, with no need for metal frames. This system provides a super-tough, lightweight carrying solution, with no drilling or permanent bodywork alterations needed. The fitting hardware gives the flexibility to mount a one, two, or three-pack set-up, depending on your ride. The set-length straps make mounting quick and easy, and the custom shape provides a tight, secure fit with plenty of distance from the exhaust. Less than a minute to mount and just seconds to remove it.

      Quick & Easy To Fit:
      • Loop the lower straps through the rear foot peg mounts
      • Loop the top straps around the rear rack Alloy Spacers
      • Tighten the top straps and the OS-BASE is firmly mounted on the seat
      Features:
      • Carrying capacity from 12 to 54 Liters with centre pack mounting option.
      • Heavy-duty Hypalon construction.
      • Quick & easy to put on/take off.
      • Reinforced stitching on all stress points.
      • Aircraft grade alloy hooks.
      • Non-slip cam buckles.
      • Includes pre-cut paintwork protection film.
      • 10 Year Guarantee
      • Weight - OS-Base + Fitting Kit  1150g / 2.5lb
      Includes:
      • Alloy spacers x 4
      • M8 x 55mm bolts x 4
      • 50mm bolt-on loops x 2
      • 80mm bolt-on loops x 2
      • M6 20mm washers x 10
      • M6 x 30mm torx bolts x 2
      • M6 x 16mm torx bolts x 2
      • Clear protective film x 4
      Before you can fit the OS-BASE to the bike you will need to make some minor adjustments to the bike hardware. Remove the 4 bolts holding the Norden baggage carrier and passenger grips. Detach the passenger grips and replace with the 4 x alloy spacers and 55mm M8 bolts included. This will raise the height of the baggage carrier to improve access for fitting the OS-BASE straps.

      Downloads

      Installation Instructions


      Related Products


      Best Sellers


      Connect with our Team
      Questions?

      Call or WhatsApp: 786-242-5400 📞

      Call or WhatsApp 786-242-5400