 |
|
|
We accept
Visa, Mastercard,
American Express,
and Discover. |
 |
  |
|
| |
|
|
|
THIS
PAGE IS NO LONGER BEING UPDATED
CLICK HERE TO VISIT OUR CURRENT UPDATED SITE
Turn Signal Canceling Devices
Model
SM-1
|
SM-1 unit
is designed as a plug-in replacement for most European bikes.
SM-1 unit
has a solid-state flashing circuit - no relays. The timer circuit
is a digital counter with 8, 16, 32 stage. Combination of 3
DIP switch positions yields time-outs of 10, 20, 40 or 80 seconds.
Built-in
beeper can be enabled or disabled by the 1st DIP switch position.
There's
also an input pin for brake switch. If you supply 12 volts from
the brake switch of the bike, the counter will suspend until
the brakes are released. This feature allows an override for
those times when you are waiting at the signals to make a turn
and do not want the time-out to cancel the flashing. This feature
is OPTIONAL - your choice to connect.
|
Click
Here For Our Application Chart
|
Model
SM-2
|
SM-2 unit
is designed as a plug-in replacement for many Japanese and some
early European bikes.
SM-2 unit
has a solid-state flashing circuit - no relays. The timer circuit
is a digital counter with 8, 16, 32 stage. Combination of 3
DIP switch positions yields time-outs of 10, 20, 40 or 80 seconds.
Built-in
beeper can be enabled or disabled by the 4th DIP switch position.
There's
also an input pin for brake switch. If you supply 12 volts from
the brake switch of the bike, the counter will suspend until
the brakes are released. This feature allows an override for
those times when you are waiting at the signals to make a turn
and do not want the time-out to cancel the flashing.
|
Click
Here For Our Application Chart
|
Model
SM-3
|
SM-3 unit
is designed as a plug-in replacement for most Hondas, including:
ST1100, Valkyrie, Valkyrie Interstate, Shadow, VFR and Suzuki
bikes.
SM-3 unit
has a solid-state flashing circuit - no relays. The timer circuit
is a digital counter with 8, 16, 32 stage. Combination of 3
DIP switch positions yields time-outs of 10, 20, 40 or 80 seconds.
Built-in
beeper can be enabled or disabled by the 4th DIP switch position.
There's
also an input pin for brake switch. If you supply 12 volts from
the brake switch of the bike, the counter will suspend until
the brakes are released. This feature allows an override for
those times when you are waiting at the signals to make a turn
and do not want the time-out to cancel the flashing.
|
|
Model
SM-4
|
SM-4 unit
is designed as a plug-in replacement for Harley and other Cruisers
with dual handlebar mounted turn signal switches. Both left
and right turn signal switches are Push-On type.
SM-4 unit
has a solid-state flashing circuit - no relays. The timer circuit
is a digital counter with 8, 16, 32 stage. Combination of 3
DIP switch positions yields time-outs of 10, 20, 40 or 80 seconds.
Built-in
beeper can be enabled or disabled by the 4th DIP switch position.
There's
also an input pin for brake switch. If you supply 12 volts from
the brake switch of the bike, the counter will suspend until
the brakes are released. This feature allows an override for
those times when you are waiting at the signals to make a turn
and do not want the time-out to cancel the flashing.
|
Click
Here For Our Application Chart
|
Model
SM-5
|
SM-5 unit is designed as a plug-in replacement for BMW "R"
Bikes with dual handlebar mounted turn signal switches. Both
left and right turn signal switches are Push-On type.
SM-5 can operate all four turn
signal lamps at reduced intensity to enhance your
bikes visibility in the traffic. This conversion
is all done internally without any modifications
to the wiring. This optional feature can be enabled
or disabled with on the fly.
SM-5 has soft touch configuration.
Soft touch configuration allows the time-outs and
running light options to be changed on the fly.
SM-5 has three selectable time-outs,
which can be activated through hardware switches
or soft touch settings. The three time-out settings
are 15 seconds, 30 seconds, and 45 seconds.
There's also an input pin for brake
switch. If you supply 12 volts from the brake switch
of the bike, the counter will suspend until the
brakes are released. This feature allows an override
for those times when you are waiting at the traffic
lights to make a turn and do not want cancel your
turn signals. This feature is OPTIONAL.
|
Click
Here For Our Application Chart
|
|
